Skip To Content

Busting Rust with Light: New Technique Safely Penetrates Top Coat for Perfect Paint Job

20 May 2014

Busting Rust with Light: New Technique Safely Penetrates Top Coat for Perfect Paint Job


FOR IMMEDIATE RELEASE
 
Contact:
Lyndsay Meyer
CLEO: 2014
+1.202.416.1435
lmeyer@osa.org
 

Busting Rust with Light: New Technique Safely Penetrates Top Coat for Perfect Paint Job

Terahertz waves characterize coats of paint without damaging them, could keep cars from rusting, identify old toxic paint that contains lead, and even analyze artifacts
 

see caption below
This three-dimensional image of a small patch of a painted surface shows that the paint is non-uniform, consisting of four different layers. Image credit: Applied Research & Photonics.
See caption belowTerahertz reflectometry reveals the paint surface's texture, which is produced by mica flakes added to the paint. Image credit: Applied Research & Photonics.
 
WASHINGTON, May 20, 2014 – To keep your new car looking sleek and shiny for years, factories need to make certain that the coats of paint on it are applied properly. But ensuring that every coat of paint—whether it is on a car or anything else—is of uniform thickness and quality is not easy.
 
Now researchers have developed a new way to measure the thickness of paint layers and the size of particles embedded inside. Unlike conventional methods, the paint remains undamaged, making the technique useful for a variety of applications from cars to artifacts, cancer detection and more. The researchers will describe their work at CLEO: 2014 being held June 8-13 in San Jose, California, USA.
 
"It's a problem that's quite challenging," said Anis Rahman, founder of Applied Research and Photonics, Inc., in Harrisburg, Pennsylvania. "None of the current methods are very successful in determining the thickness of individual layers and coatings in a nondestructive fashion."
 
The new technique, which was developed by Rahman and his son, Aunik, uses terahertz reflectometry, in which a beam of terahertz-frequency radiation is fired onto the paint. Terahertz radiation, which has frequencies between infrared and microwave radiation, is nonionizing and therefore harmless, Rahman said.
 
The terahertz beam penetrates the paint layers, which are each tens of microns (millionths of a meter) thick and bounces back at different intensities of light depending on the thickness of each layer of material the beam encounters. Measuring the intensities of the reflected beams reveals the thickness of each coat of paint down to a precision of tens of nanometers, almost a million times narrower than the head of a pin. This method can also be used to estimate the size of any particles added to the paint as small as 25 nanometers.
 
In addition to quality control, the method would be useful for testing paints as well, Rahman said. For example, in order for an overcoat on a car to protect the paint underneath, the two layers have to remain separate.  Terahertz reflectometry can be used to make sure that the overcoat does not penetrate the layers below. The method can also help companies analyze how their paints react with different surfaces, such as plastic, wood or metal.
 
Environmental health applications are also possible, Rahman said, since the method can help detect whether old paint contains lead. Archaeologists and art historians can even employ it to analyze the paint on artifacts.
 
But terahertz reflectometry is useful for more than analyzing paint, Rahman added. The researchers are now configuring their techniques to analyze the structure of skin as a way to help diagnose early stages of skin cancer such as melanoma and basal cell carcinoma. With the addition of spectroscopy to measure the different wavelengths of reflected beams, this technique can be used to analyze the structure of skin layers and determine if they are healthy or diseased.
 
The instrument is ready for commercialization and Rahman says they are currently looking for partners to help bring it to market. 
 
Presentation AW3H.4, titled “Terahertz reflectometry of multi-layered paint thicknesses and estimation of particle sizes,” will take place Wednesday, June 11, at 5:15 p.m. in Executive Ballroom 210H of the San Jose Convention Center.
 
PRESS REGISTRATION: A press room for credentialed press and analysts will be located in the San Jose Convention Center, Sunday through Thursday, June 8-12. Those interested in obtaining a press badge for CLEO: 2014 should contact Lyndsay Meyer at 202.416.1435 or lmeyer@osa.org.
 
About CLEO
With a distinguished history as the industry's leading event on laser science, the Conference on Lasers and Electro-Optics (CLEO) is the premier international forum for scientific and technical optics, uniting the fields of lasers and opto-electronics by bringing together all aspects of laser technology, from basic research to industry applications. CLEO: Expo showcases the latest products and applications from more than 300 participating companies from around the world, providing hands-on demonstrations of the latest market innovations and applications. The Expo also offers valuable on-floor programming, including Market Focus and the Technology Transfer program.

Sponsored by the American Physical Society's (APS) Laser Science Division, IEEE Photonics Society and The Optical Society (OSA), CLEO provides the full range of critical developments in the field, showcasing the most significant milestones from laboratory to marketplace. With an unparalleled breadth and depth of coverage, CLEO connects all of the critical vertical markets in lasers and electro-optics. For more information, visit www.cleoconference.org. CLEO: 2014 takes place June 8 - 13 at the San Jose Convention Center.
Share:
Image for keeping the session alive